shock absorber Watford

What's the role suspension damper? Suspension damper is a crucial element responsible for your adhesion of wheels towards pavement. Its task is to be able to suppress fluctuations suspension in uneven roads and avoiding the bouncing of wheels and loss in contact with the ground. Shock absorber as every part of operating in the vehicle, wears out, and occasionally needs being replaced. How does the trade MacPherson strut front distress absorber? Depending on the design in the vehicle shock absorber may be integrated with spring suspension and also to the carrier element. In this case, the assembly is known as a shock absorber struts. Changing the shock absorber is to lift the car, removing the wheels, removing the shock absorber mounting in the switch, and then removing your MacPherson strut upper rising. The whole column will be removed and disassembled outside with a bench. The spring is compressed in the compressor to facilitate it's removal. Removable is upper strut mount that has a pillow and bearing allows turning top wheels. A new shock will be assumed spring, the upper bearing as well as pillow. After releasing the compressed position in the spring with a full column is mounted the government financial aid the car. What should I consider? For all replacement in the shock absorber must use a new cover his rods and buffer. It is also wise to replace the top of the pillow and the bearing to counteract rapid breakdown of these elements and the requirement to disassemble MacPherson strut once more. After replacing the shock absorbers must also check suspension geometry to ensure that the car will behave on the highway properly and will definitely not occurred accelerated tire don. Shock absorbers are mentioned in pairs during one axis. It is difficult to look for the viability of the ingredient, which is a distress absorber, as it depends on what the car is employed. However, you can roughly say the shock absorbers lose their properties following the mileage of about 100, 000 km. Their efficiency can always be tested for diagnostic course, for example, vehicle inspection stations.