shock absorber Kilmarnock

JOLT Do not hold piston fly fishing rod by any tools (pliers, etc.). Do not pour water, oil or any different liquid column housing as this would damage the cartridge. Do not use strength tools for tightening and loosening nuts within the piston rod. Impact wrench can tighten the more expensive torque than recommended. During installation KYB jolt absorbers use all rising hardware (nuts, spacers, washers or other elements) inside the package. Some KYB shock absorbers can vary slightly in shape and size from the original jolt absorber. If the vehicle had been replaced original shock absorbers another brand over the assembly could be utilized some parts (Particles cover, stop, sleeves etc.) that cannot double for KYB shock absorber construction. Shock absorbers should be replaced in pairs within the axis. It is recommended that at the very least three "pumping" damper prior to installation. Before tightening the jolt absorbers mounted, ensure the correct position from the other elements of the particular suspension. SPRING When replacing the usage of appropriate tools - the clamp to springs and also the appropriate overlay. The springs should be replaced in pairs on an axle to ensure equal ground clearance and steer clear of tipping the vehicle to a single side when braking. During the assembly and disassembly need to be careful to avoid damage while uncontrolled expansion. After installation, check suspension geometry. When replacing the springtime, it is recommended of which simultaneous replacement shock absorbers. Worn or broken springs can can damage shock absorbers.