shock absorber Harlow

Using some vehicles can make a bit of trouble getting to the top of strut mount, because it is not necessarily visible. It happens that from the upholstery trunk are unique caps, the image we gain access to the attachment. Unfortunately, in most cars, we must remove the carpet from the trunk, but it should not really cause major problems, because it is often the snap-fit. However, in some sedans many times that after removing the liner does don’t you have the shock absorbers. We'll find them only after removing the rear seats. But these steps are certainly not difficult, so should not always be an obstacle too hard. Also, if the rear suspension is usually mounted McPherson column, it does not have to immediately capitulate. You may find that in this instance does not require virtually any special equipment. The rear springs are usually in some models so smooth and jump damper so large that certain can easily compress your spring, using the weight of your body. When installing the need to look closely at the way the position in accordance with the springs and jolt absorber upper mounting cup. The mistake will simply cause extra work because the damper badly complex can't be assumed. Before the repair throughout Harlow should also check the fitness of rubber or plastic addresses and buffers the jolt absorber. If these components display signs of wear then you need to replace them with jolt.