shock absorber Cowbridge

GREAT SHOCK Do not hold piston fly fishing line by any tools (pliers, etc.). Do not pour water, oil or any different liquid column housing as this will damage the cartridge. Do not use strength tools for tightening and loosening nuts for the piston rod. Impact wrench can tighten the more expensive torque than recommended. During installation KYB distress absorbers use all installation hardware (nuts, spacers, washers or other elements) within the package. Some KYB shock absorbers may vary slightly in size and shape from the original distress absorber. If the vehicle had recently been replaced original shock absorbers another brand over the assembly could be used some parts (Airborne debris cover, stop, sleeves etc.) that cannot be taken for KYB shock absorber construction. Shock absorbers should continually be replaced in pairs for the axis. It is recommended that no less than three "pumping" damper ahead of installation. Before tightening the distress absorbers mounted, ensure the correct position of the other elements of the particular suspension. SPRING When replacing the use of appropriate tools - a new clamp to springs along with the appropriate overlay. The springs should continually be replaced in pairs by using an axle to ensure equal ground clearance and steer clear of tipping the vehicle to 1 side when braking. During the assembly and disassembly should be careful to avoid harm while uncontrolled expansion. After installation, check suspension geometry. When replacing the spg, it is recommended which simultaneous replacement shock absorbers. Worn or broken springs can cause damage to shock absorbers.