shock absorber Ballindalloch

GREAT SHOCK Do not hold piston fly fishing line by any tools (pliers, etc.). Do not pour drinking water, oil or any other liquid column housing as this would damage the cartridge. Do not use electrical power tools for tightening and loosening nuts about the piston rod. Impact wrench can tighten the greater torque than recommended. During installation KYB jolt absorbers use all installation hardware (nuts, spacers, washers or other elements) inside package. Some KYB shock absorbers may vary slightly in shape and size from the original jolt absorber. If the vehicle had been recently replaced original shock absorbers another brand through the assembly could be used some parts (Airborne dirt and dust cover, stop, sleeves etc.) that cannot provide for KYB shock absorber putting your unit together. Shock absorbers should be replaced in pairs about the axis. It is recommended that a minimum of three "pumping" damper before installation. Before tightening the jolt absorbers mounted, ensure the correct position on the other elements of this suspension. SPRING When replacing the by using appropriate tools - a clamp to springs along with the appropriate overlay. The springs should be replaced in pairs by using an axle to ensure equal ground clearance and steer clear of tipping the vehicle to 1 side when braking. During the assembly and disassembly should be careful to avoid injuries while uncontrolled expansion. After installation, check suspension geometry. When replacing the spg, it is recommended that simultaneous replacement shock absorbers. Worn or broken springs can affect shock absorbers.