shock absorber Newtownards

JOLT Do not hold piston rod by any tools (pliers, etc.). Do not pour h2o, oil or any different liquid column housing as this could damage the cartridge. Do not use electric power tools for tightening and loosening nuts on the piston rod. Impact wrench can tighten the greater torque than recommended. During installation KYB shock absorbers use all mounting hardware (nuts, spacers, washers or other elements) inside package. Some KYB shock absorbers can differ slightly in configuration from the original shock absorber. If the vehicle had also been replaced original shock absorbers another brand throughout the assembly could be put on some parts (Dirt cover, stop, sleeves etc.) that cannot provide for KYB shock absorber construction. Shock absorbers should regularly be replaced in pairs on the axis. It is recommended that at the very least three "pumping" damper just before installation. Before tightening the shock absorbers mounted, ensure the correct position in the other elements of the suspension. SPRING When replacing the using appropriate tools - some sort of clamp to springs along with the appropriate overlay. The springs should regularly be replaced in pairs with an axle to ensure equal ground clearance avoiding tipping the vehicle to one side when braking. During the assembly and disassembly have to be careful to avoid injury while uncontrolled expansion. After installation, check suspension geometry. When replacing the early spring, it is recommended that will simultaneous replacement shock absorbers. Worn or broken springs can cause damage to shock absorbers.