shock absorber London

GREAT SHOCK Do not hold piston fly fishing rod by any tools (pliers, etc.). Do not pour h2o, oil or any some other liquid column housing as this might damage the cartridge. Do not use strength tools for tightening and loosening nuts on the piston rod. Impact wrench can tighten the bigger torque than recommended. During installation KYB shock absorbers use all increasing hardware (nuts, spacers, washers or other elements) from the package. Some KYB shock absorbers can differ slightly in shape and size from the original shock absorber. If the vehicle had been replaced original shock absorbers another brand through the assembly could be employed some parts (Dirt cover, stop, sleeves etc.) that cannot be used for KYB shock absorber construction. Shock absorbers should always be replaced in pairs on the axis. It is recommended that at the very least three "pumping" damper before installation. Before tightening the shock absorbers mounted, ensure the correct position in the other elements of this suspension. SPRING When replacing the by using appropriate tools - some sort of clamp to springs and also the appropriate overlay. The springs should always be replaced in pairs when using axle to ensure equal ground clearance and prevent tipping the vehicle to one side when braking. During the assembly and disassembly must be careful to avoid damage while uncontrolled expansion. After installation, check suspension geometry. When replacing the spring, it is recommended of which simultaneous replacement shock absorbers. Worn or broken springs can affect shock absorbers.