shock absorber Bristol

SHOCK Do not hold piston fishing rod by any tools (pliers, etc.). Do not pour h2o, oil or any other liquid column housing as this could damage the cartridge. Do not use electric power tools for tightening and loosening nuts on the piston rod. Impact wrench can tighten the larger torque than recommended. During installation KYB great shock absorbers use all mounting hardware (nuts, spacers, washers or other elements) from the package. Some KYB shock absorbers can vary slightly in size and shape from the original great shock absorber. If the vehicle had recently been replaced original shock absorbers another brand during the assembly could be put on some parts (Airborne dirt and dust cover, stop, sleeves etc.) that cannot provide for KYB shock absorber putting your unit together. Shock absorbers should regularly be replaced in pairs on the axis. It is recommended that at the least three "pumping" damper prior to installation. Before tightening the great shock absorbers mounted, ensure the correct position on the other elements of your suspension. SPRING When replacing the usage of appropriate tools - the clamp to springs and also the appropriate overlay. The springs should regularly be replaced in pairs with an axle to ensure equal ground clearance and avoid tipping the vehicle to a single side when braking. During the assembly and disassembly must be careful to avoid damage while uncontrolled expansion. After installation, check suspension geometry. When replacing the springtime, it is recommended that will simultaneous replacement shock absorbers. Worn or broken springs can affect shock absorbers.